Sharp LC-60LE835X manuals
TV and Video > Flat Panel Television
When we buy new device such as Sharp LC-60LE835X we often through away most of the documentation but the warranty.
Very often issues with Sharp LC-60LE835X begin only after the warranty period ends and you may want to find how to repair it or just do some service work.
Even oftener it is hard to remember what does each function in Flat Panel Television Sharp LC-60LE835X is responsible for and what options to choose for expected result.
Fortunately you can find all manuals for Flat Panel Television on our side using links below.
Sharp LC-60LE835X Operation Manual
84 pages 5.27 Mb
3 OPERATION MANUAL Dear SHARP customer Contents Precautions For Daily UseObserve the following items Important safety precautionsCaring for the cabinet Caring for the front panel 5 Introduction4 6 IntroductionPrecautions when transporting the TV 5 7 Supplied accessories Optional accessories Introduction Protection against overturning 1Affix the TV to the wall or a pillar using n o Cup hook (commercially available) Tie (commercially available) 1Place the TV on the table. 2Pull the attached restraining bracket out so that it 3Insert commercially available screws in the holes Restraining bracket (attached) Screws (commercially available) 8 Preparation9 Attaching the stand unit 52/46/40LE835X 1Confirm that there are screws with the stand unit. 2Attach the supporting post for the stand unit onto 3Insert the stand into the openings on the bottom 4Insert and tighten middle screws into the holes on 5Attaching the stand cover. 10 Attaching the stand unit 60LE835X 1Confirm that there are screws with the stand unit. 2Attach the supporting post for the stand unit onto 3Insert the stand into the openings on the bottom 4Insert and tighten middle screws into the holes on 5Attaching the stand cover. 11 Connecting the TV 1Connect the antenna cable.o p Standard DIN45325 connector (IEC169-2) Antenna cable (75-ohm coaxial type: commercially Room antenna terminal (75-ohm type) 2Connect external devices. 3Plug the AC cord in to the AC outlet (product 4Bundle the cables. Angle adjustment 12 Using the remote control unit Inserting the batteries 1Open the battery cover. 2Insert the two supplied AAA 3Close the battery cover. Angle of the remote control unit Cautions regarding the remote control unit TV (front view) TV (rear view) 13 Part names and functions15 Quick guide What is the HOME? Basic operationDisplay the HOME screenPress HOME and the HOME screen displays. Exit the HOME screenThe operation will exit the HOME screen if you press B before it is completed. Select an itemSelecting in the HOME. Press a/b/c/d to select the desired service or menu, and then press A. 13 2 7 4 9 8 5 6Regarding the instruction on the manualOn this manual, the following expression is often used in order to simplify instructions. This indicates how to navigate through the HOME screen using a/b/c/d and A buttons. 14 16 Quick guide Using software keyboardUse the software keyboard when you need to input text. Char.Set Caps Cancel Done Delete Clear Cursor Left Caps Char.Set Cursor Right 17 Initial auto installation 1Press POWERa on the TV. 2Setting the OSD language. 3Selecting the location of the TV. 4Setting the country. 5Press c/d to select Digital search or Analogue 6The TV searches for, sorts and stores all the Checking signal strength and channel strength 1Go to HOME > TV Menu > Setup > View EChecking signal strength 2Press a/b to select Signal strength, and then EChecking channel strength 3Press a/b to select Channel strength, and then 4Position and align the antenna so that the Supplying power to the antenna 1Go to HOME > TV Menu > Setup > View 2Press c/d to select On, and then press Quick guide Daily operation Turning on/off the power using the TV front panel 1Turn on the power. 2Turn off the power. Turning on/off the power using the remote control unit 1To standby mode. 2Switch on from standby. 1Turn on the power. 2Select a programme using 09 numeric buttons or CHr/s on the 18 Watching TV19 Switching between digital and analogue broadcastsWatching digital broadcasts Watching analogue broadcasts Programme guide (CH list) 1Press A to display the programme guide list. 2Press a/b to display your desired programme, Programme information (DTV) Programme info. EUsing Info on the menu screen Selecting an external video source 20 Switching the digital audio format Switching the analogue audio formatIn the NICAM TV broadcasts In the TV mode of A2 TV broadcasts 21 TeletextWhat is teletext? Turning teletext on/off 1Select a TV channel or external source providing a 2Press m to display the teletext. 3Press m again to display the teletext on the right Buttons for teletext operations Text language 1Go to HOME > TV Menu > Setup > View Text language East Europe Farsi Greek/Turkish Cyrillic Arabic 22 Initial teletext page 1Go to HOME > TV Menu > Setup > View 2Press a/b/c/d to select the desired language, MHEG-5 (EPG) 23 EPGUseful settings for using EPG EPG Display range setup Genre icon setup 1Go to HOME > TV Menu > Setup > Option 2Press a/b to select the desired genre, and then EGenre icon list Genre icon list for Australia Genre icon list except Australia 3Press a/b to select a level to pick out or search 24 Selecting a programme using EPG 3Press A to tune to the selected programme.Press EPG. Basic operation EDisplay the EPG screen EDisplay the EPG screen 1Press c/d to select the time span you want to search. 2Press a/b to select the desired programme. EClose the EPG screen Selecting a programme 3Check programme information 1Press a/b/c/d to select the programme you 2Press R.23 4Search a programme in a categoryLC40LE835_book.indb 23LC40LE835_book.indb 23 10/7/2011 12:04:36 PM10/7/2011 12:04:36 PM Refer to page 24 for the timer setup.: Select : Enter : Back : Exit : Select : Enter : Back : Exit 5Search for a programme by date/time 25 1Press Y. 2Press c/d to select the desired time span and then press A. 3Press a/b to select the desired programme, and then press A. 6Display the timer list for TV programmes Press B. E Before connecting ... 27 Connecting external devices28 Video connections HDMI connectionop DVI/HDMI conversion E When using the HDMI 2 terminal 1Press INPUT to select HDMI2 from the 2Go to HOME > TV Menu > Setup > 1Press INPUT to select HDMI2 from the 2Go to HOME > TV Menu > Setup > 29 Connecting external devices Component cable (commercially available) Audio cable (commercially available) VIDEO connection AV cable (supplied accessory) AV cable (commercially available) 30 Audio connections Speaker/amplifier connection EConnecting an amplifier with digital/ analogue audio inputs Optical audio cable (for digital audio) (commercially Stereo conversion cable (for analogue audio) Notice EAfter connecting 31 AQUOS LINK Controlling HDMI devices using AQUOS LINK EWhat is AQUOS LINK? EWhat you can do with AQUOS LINK One touch play Operating title list of external devices Controlling the AQUOS LINK- compatible audio system Multiple control of HDMI devices Single remote control operation 32 AQUOS LINK connection Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system HDMI-certified cable Optical audio cable Connecting an AQUOS BD player/AQUOS recorder only Operating an AQUOS LINK device 1Press I to start playback of a title. 2Press J to fast forward. 1After you selected recording media (HDD, DVD, 2Press REC E to start recording. 3Press REC STOP H to stop recording. AQUOS LINK 33 AQUOS LINK AQUOS LINK menuGo to HOME > TV Menu > Link operation > select the menu you want to set. Connection for using Audio return channel 32 Picture settingsGo to HOME > TV Menu > Setup > Picture. AV mode OPCAutomatically adjusts the brightness of the screen. Picture adjustmentsAdjusts the picture to your preference with the following picture settings. Adjustment items 34 Basic adjustment35 AdvancedC.M.S.-hue C.M.S.-saturation C.M.S.-value Colour gamut range Colour temp. Quick shoot Quad pixel plus Gamma adjustment Film mode Active contrast DNR (Digital Noise Reduction) Monochrome Range of OPC 36 Audio settingsAuto volume Audio adjustment Surround Bass enhancer Clear voice Audio description setting 37 Power save settingsECO picture control Energy save No signal off No operation off Sleep timer Audio only 38 Channel settings Auto installation 1 1Go to HOME > TV Menu > Setup > View 2If you have already set the password, enter it here. 3Press c/d to select Yes, and then press 4Press a/b to select the desired language, and 5Press c/d to select Digital search or Analogue Programme setup Digital setting 2If you have already set the password, enter it here. 3The Digital setting screen displays, and then 4Press a/b to select the desired menu item, and 5Press c/d to select Yes, and then press Additional search Manual search Manual adjust 1Press a/b to select the desired service. 2Press the Colour button on the remote control Buttons for Manual adjust operation 39 3Repeat steps 4 and 5 in Digital setting.Additional search Manual adjust Sort 1Press c/d to select Yes, and then press 2Press a/b/c/d to select the channel you want 3Press a/b/c/d to move it to the desired 4Repeat steps 2 and 3 until all desired channels are Erase programme 1Press c/d to select Yes, and then press 2Press a/b/c/d to select the channel you want 3Press c/d to select Yes, and then press 4Repeat steps 2 and 3 until all desired channels are TV Start-up time setting Quick start 5Press A. Individual setting Password Password 1If you already set the password, enter it here. 2Press c/d to select Yes, and then press 3Enter the four-digit number as a password using 4Enter the same four-digit number as in step 3 to 1Enter the password. 2Press c/d to select No, and then press 3Press c/d to select Yes, and then press Parental rating 1Go to HOME > TV Menu > Setup > View 40 Useful viewing functions41 Individual setting TimeTime display Time zone Individual setting Language Digital audio language ESwitching the multi audio languages Subtitle ESwitching subtitle languages ESet For hearing impaired to Yes Language 42 Optional features settingsSelecting the picture size manually Wide mode 1Go to HOME > TV Menu > Setup > Option 2Press a/b to select the desired item. Selecting the WSS picture size WSS 43 4:3 modeWSS signal 4:3 screen 4:3 mode Normal 4:3 mode Panorama Setting audio input Audio select Skipping specified inputs Input skip 44 Input label 1Press INPUT to select the desired input source 2Go to HOME > TV Menu > Setup > Option 3Select each character of the new name for the 4Repeat the above until the name is fully spelt out, Selecting the HDMI picture size HDMI auto view 1Press INPUT to select the input source (HDMI1, 2Go to HOME > TV Menu > Setup > Option Headphone/Audio out select Colour system 45 Channel selecting effectProgramme title display Adjusting image position Position 46 Additional featuresIllumination Game play time Key lock Connecting to the network Wired installation EWired connection overview EHow to connect n ETHERNET cable (commercially available) 1Switch on the router (commercially available). 2Connect the ETHERNET terminal on the TV to the 3Go to HOME > Network setup > Connection 4Press c/d to select Wired, and then press 5Select OK to confirm. 47 Network function53 Other useful featuresUsing a USB device Connecting a USB device Selecting USB usage 1Connect a USB device to one of the USB ports. 2Select the function you want to use. 1Press c/d to select Yes, and then press 2Press c/d to select Yes, and then press 3Select OK.For USB media Disconnecting the USB device For time shift For USB media 54 Time shift 1Press READY. 2Press I.Buttons for time shift operation 56 Auto input selection Jump time setting Device registration Device check 57 USB media/Home networkUSB media/Home network Selecting the mode Common operationSelect USB media or Home network from the HOME screen to enter this mode. Other operationSelect the USB media mode option on the screen when a USB device is connected to the TV. Selecting modes and drives/servers 1Press B. 2Press c/d to select Photo mode, Music mode or Video mode, and then press A. 56 58 Photo modeViewing thumbnails Buttons for thumbnail operations 3D modeYou can view photos in 3D mode. A. Viewing enlarged photos Buttons for enlarged photo display operation Slide show ESelecting the BGM Buttons for slide show BGM select operation ESlide show Buttons for slide show operation 59 Music mode60 Video modeButtons for file selecting operations Viewing a video Buttons for playing mode EControl panel Press CONTROL and the control panel displays and operations for video playback will be available.* 59 Selecting the picture size for video modeYou can select the picture size in Video mode. 61 1Select Video mode. 2Press WIDE. 3Press WIDE or a/b to select the desired item. DivX(R) setup EDivX(R) VOD registration EDivX(R) VOD deregistration USB device compatibility Home network server compatibility Connecting a PC HDMI connection n o p DVI/HDMI cable 3.5 mm stereo minijack Analogue connection q r RGB cable 3.5 mm stereo minijack s t DVI/RGB conversion cable 3.5 mm stereo minijack Displaying a PC image on the screen Selecting the picture sizeYou can select the picture size. 1Press WIDE. 2Press WIDE or a/b to select the desired item. 62 Connecting a PC63 Adjusting the PC image Auto sync. 1Press INPUT to select PC from the INPUT 2Go to HOME > TV Menu > Setup > Option Adjusting the PC image manually Fine sync. 1Press WIDE to select PC from the INPUT 2Go to HOME > TV Menu > Setup > Option 3Press a/b to select the specific adjustment item. 4Press c/d to adjust the item to the desired 64 PC control of the TVCommunication conditions for IP Communication conditions for RS-232C Communication procedure Command format Command four digits: Command. The text of four Parameter four digits: Parameter 09, blank, ?, minus Return code (0DH): Parameter Response code format 65 Command list64 You can use special 3D glasses to watch 3D-supported images on this TV. CAUTION Display format for 3D and 2D images 66 Enjoying 3D image viewing67 Viewing 3D imagesReceiving a 3D image signal that can be detected automatically 1Go to HOME > TV Menu > Setup > Option EWhen 3D auto change is set to Yes EWhen 3D auto change is set to No 2Turn on the power of the 3D glasses, and then Switching 3D to 2D mode 1Press 3D during the 3D mode. 2Select Yes, and then press A to switch to 3Take off the 3D glasses and turn off the power of Receiving a 3D image signal that cannot be detected automatically 1Press 3D. 2Press c/d to select 3D or 2D, and then press ETo view in 3D mode ETo view in 2D mode 68 Watching 2D images in 3D 1Press 3D. 2Press c/d to select 2D s 3D, and then press 3Turn on the power of the 3D glasses, and then Switching to the previous mode 1Press 3D. 2Select Yes, and then press A. 3D Menu Configuring the TV settings to enhance 3D image viewing 3D picture adjustments EBasic operation AV mode 3D brightness boost 69 3D setup EBasic operation 3D auto change 2D s 3D convert effect 3D still image effect setting 3D still image effect adjustment Viewing time info 3D test 3D glasses control 70 Troubleshooting 3D ImagesProblem Possible solution These 3D glasses are only for use with SHARP LCD TVs supporting 3D. AN-3DG10-S AN-3DG20-B 3D glasses lenses 3D glasses infrared receiver Caution during viewing Usage range of the 3D glasses TroubleshootingProblem Possible solution Troubleshooting Digital broadcastingProblem Error code Possible solution 71 Appendix72 Reset 1Go to HOME > TV Menu > Setup > View 2If you have already set the password, enter it here. 3Press c/d to select Yes, and then press 4Press c/d to select Yes, and then press 5Press a/b to select the desired language listed 6Setting the country. 7The TV searches for and stores all the receivable Updating your TV via DVB-T Download setupSearching for updates Downloading the software 1If the software is updated, the confirmation 2Follow the screen prompts. 73 Getting informationMessage list Receiver report Identification Updating your TV via USB/Network Software update 1Go to HOME > TV Menu > Setup > 2Press A and then insert the USB device 3The TV displays a confirmation screen while 4The TV displays the software version information 5Press c/d to select Yes to update the system, 6The TV restarts automatically, and the software 74 Information on the software licence for this product Software licence ESoftware composition Warning regarding basic use Cautions regarding use in high and low temperature environments Trademarks 75 Specifications76 Removing the standBefore setting TV on the wall LC-52LE835X/LC-46LE835X/LC-40LE835X 1Loosen the screw used to secure the stand cover 2Remove the stand. 1Loosen the two screws used to secure the stand 2Remove the stand. 77 Mounting the TV on a wallHanging on the wall About setting the TV angle EWall mount audio setup 78 Dimensional drawingsLC-60LE835XLC40LE835_book.indb 76LC40LE835_book.indb 76 10/7/2011 12:05:05 PM10/7/2011 12:05:05 PM Dimensions do not include protrusions such as screws and some parts. LC-52LE835X 79 Dimensional drawingsLC-46LE835XLC40LE835_book.indb 77LC40LE835_book.indb 77 10/7/2011 12:05:06 PM10/7/2011 12:05:06 PM Dimensions do not include protrusions such as screws and some parts. LC-40LE835X NEW ZEALAND AUSTRALIASHARP APPROVED SERVICE CENTRE 83 www.sharp.net.au1300 135 022SHARP APPROVED SERVICE CENTRE www.sharp.net.nz
Also you can find more Sharp manuals or manuals for other TV and Video.