Sharp LC-60LE835X operation manual Removing the stand, Before setting TV on the wall

Appendix

Removing the stand	LC-60LE835X
	1 Loosen the two screws used to secure the stand
For wall mounting with the optional bracket (AN-37AG2	cover.
+ AN-37P30 or AN-52AG4) remove the stand.

Before setting TV on the wall

• Remove the connected cables (DVD, VCR, etc) from the terminals.

• Before performing work, make sure to turn off the TV.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

NOTE

• To attach the stand, perform the above steps in reverse order.

• As the TV is very heavy, be careful when moving it.

LC-52LE835X/LC-46LE835X/LC-40LE835X

1Loosen the screw used to secure the stand cover

and remove the cover.

2 Remove the stand.

1 Unfasten the four screws used to secure the stand in place.

2 Remove the cover.

2 Remove the stand.

1 Unfasten the screws used to secure the stand in place.

2 Detach the stand from the TV (hold the stand so it will not drop from the edge of the base area).

LC-52/46LE835X

LC-40LE835X

74