Main
Page
OPERATION MANUAL
Dear SHARP customer
Contents
Page
3
Precautions For Daily Use
Observe the following items
Important safety precautions
Introduction
4
Introduction
Precautions when transporting the TV
5
Supplied accessories
Optional accessories
Introduction
Protection against overturning
1Affix the TV to the wall or a pillar using
Preparation
Attaching the stand unit 52/46/40LE835X
1Confirm that there are screws with the stand unit.
2Attach the supporting post for the stand unit onto
3Insert the stand into the openings on the bottom
4Insert and tighten middle screws into the holes on
Attaching the stand unit 60LE835X
1Confirm that there are screws with the stand unit.
2Attach the supporting post for the stand unit onto
3Insert the stand into the openings on the bottom
4Insert and tighten middle screws into the holes on
Connecting the TV
1Connect the antenna cable.
o
p
Standard DIN45325 connector (IEC169-2) Antenna cable (75-ohm coaxial type: commercially
Using the remote control unit Inserting the batteries
1Open the battery cover. 2Insert the two supplied AAA
3Close the battery cover.
Angle of the remote control unit
Cautions regarding the remote control unit
Part names and functions
Part names and functions Remote control unit
13
Quick guide
What is the HOME?
10
You
Tube
Quick guide
Using software keyboard
Use the software keyboard when you need to input text.
Char.Set Caps Cancel
Done Delete
Initial auto installation
1Press POWERa on the TV.
2Setting the OSD language.
3Selecting the location of the TV.
4Setting the country.
Watching TV
Switching between digital and analogue broadcasts
Watching digital broadcasts
Watching analogue broadcasts
Programme guide (CH list)
1Press A to display the programme guide list. 2Press a/b to display your desired programme,
Switching the digital audio format
Switching the analogue audio format
In the NICAM TV broadcasts
In the TV mode of A2 TV broadcasts
Teletext
What is teletext?
West Europe
Turning teletext on/off
1Select a TV channel or external source providing a
Initial teletext page
1Go to HOME > TV Menu > Setup > View
2Press a/b/c/d to select the desired language,
MHEG-5 (EPG)
EPG
Useful settings for using EPG
Basic setting
EPG
EPG display settings
Selecting a programme using EPG
Press EPG again.
3Press A to tune to the selected programme.
Press EPG.
Basic operation EDisplay the EPG screen
1Press Y. 2Press c/d to select the desired time span and then press A.
Next Prev.
3Press a/b to select the desired programme, and then press A.
6Display the timer list for TV programmes Press B.
Page
E Before connecting ...
Connecting external devices
Video connections HDMI connection
op
DVI/HDMI conversion
E When using the HDMI 2 terminal
1Press INPUT to select HDMI2 from the
Connecting external devices
Component cable (commercially available) Audio cable (commercially available)
VIDEO connection
AV cable (supplied accessory) AV cable (commercially available)
Audio connections Speaker/amplifier connection
EConnecting an amplifier with digital/ analogue audio inputs
Optical audio cable (for digital audio) (commercially
Stereo conversion cable (for analogue audio)
Notice
AQUOS LINK
Controlling HDMI devices using AQUOS LINK
EWhat is AQUOS LINK?
EWhat you can do with AQUOS LINK One touch play
Operating title list of external devices
AQUOS LINK connection
Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system
n
n o
HDMI-certified cable
AQUOS LINK
AQUOS LINK menu
Go to HOME > TV Menu > Link operation > select the menu you want to set.
Connection for using Audio return channel
32
Basic adjustment
Advanced
C.M.S.-hue
C.M.S.-saturation
C.M.S.-value
Colour gamut range
Audio settings
Auto volume
Audio
Audio adjustment
Surround
Power save settings
ECO picture control
Energy save
No signal off
No operation off
Channel settings
Auto installation
1
1Go to HOME > TV Menu > Setup > View
2If you have already set the password, enter it here.
3Repeat steps 4 and 5 in Digital setting.
Additional search
Manual adjust
Sort
1Press c/d to select Yes, and then press
Useful viewing functions
Individual setting Time
Time display
Time display
Time format
Time zone
Optional features settings
Selecting the picture size manually
Wide mode
1Go to HOME > TV Menu > Setup > Option
2Press a/b to select the desired item.
4:3 mode
WSS signal 4:3 screen 4:3 mode Normal 4:3 mode Panorama
Setting audio input
Audio select
Skipping specified inputs
Input label
1Press INPUT to select the desired input source
2Go to HOME > TV Menu > Setup > Option
3Select each character of the new name for the
4Repeat the above until the name is fully spelt out,
Channel selecting effect
Programme title display
Adjusting image position
Position
Additional features
Illumination
Game play time
Key lock
ECancelling the lock
Network function
Wireless installation
EHow to connect
1Switch on your router before starting the network
2Connect the wireless LAN USB adapter (optional
3Go to HOME > Network setup > Connection
4Press c/d to select Wireless, and then press
5Select OK to confirm. 6Press a/b to select Wireless setup in the
Network function Specifications (Wireless LAN USB adapter)
Optional accessories (Wireless LAN USB adapter)
Using the skype Welcome to skype
EHow to start skype
Tube
1Buy a communication camera.
2 Get the operation manual for the skype
4Press a/b/c/d to select a function, and then
5Press a/b/c/d to select the address bar, and
6The software keyboard will pops up when you
Clear browser setting
About links
DISCLAIMERS
Other useful features
Using a USB device
Connecting a USB device
Selecting USB usage
1Connect a USB device to one of the USB ports.
Time shift
1Press READY.
2Press I.
Buttons for time shift operation
Page
Auto input selection
Jump time setting
Device registration
Device check
55
USB media/Home network
USB media/Home network
Selecting the mode Common operation
Select USB media or Home network from the HOME screen to enter this mode.
Other operation
Photo mode
Viewing thumbnails
Buttons for thumbnail operations
3D mode
You can view photos in 3D mode.
Music mode
Buttons for music mode
58
Video mode
Buttons for file selecting operations
Viewing a video
Buttons for playing mode
EControl panel
1Select Video mode.
2Press WIDE.
3Press WIDE or a/b to select the desired item.
EXAMPLE
View setting
Connecting a PC
Adjusting the PC image
Auto sync.
1Press INPUT to select PC from the INPUT
2Go to HOME > TV Menu > Setup > Option
Adjusting the PC image manually
PC control of the TV
Communication conditions for IP
Communication conditions for RS-232C
Communication procedure
Command format
Command list
64
You can use special 3D glasses to watch 3D-supported images on this TV.
CAUTION
Display format for 3D and 2D images
Enjoying 3D image viewing
Viewing 3D images
Receiving a 3D image signal that can be detected automatically
1Go to HOME > TV Menu > Setup > Option
EWhen 3D auto change is set to Yes
EWhen 3D auto change is set to No
Watching 2D images in 3D
1Press 3D. 2Press c/d to select 2D s 3D, and then press
3Turn on the power of the 3D glasses, and then
Switching to the previous mode
1Press 3D.
3D setup
EBasic operation
3D auto change
2D s 3D convert effect
3D still image effect setting
Troubleshooting 3D Images
Problem Possible solution
These 3D glasses are only for use with SHARP LCD TVs supporting 3D.
AN-3DG10-S
AN-3DG20-B
Appendix
Reset
1Go to HOME > TV Menu > Setup > View
2If you have already set the password, enter it here. 3Press c/d to select Yes, and then press
4Press c/d to select Yes, and then press
5Press a/b to select the desired language listed
Getting information
Message list
Receiver report
Identification
Updating your TV via USB/Network
Information on the software licence for this product Software licence
ESoftware composition
Warning regarding basic use Cautions regarding use in high and low temperature environments
Trademarks
Specifications
Removing the stand
Before setting TV on the wall
LC-52LE835X/LC-46LE835X/LC-40LE835X
1Loosen the screw used to secure the stand cover
2Remove the stand.
Mounting the TV on a wall
Hanging on the wall
About setting the TV angle
EWall mount audio setup
Dimensional drawings
LC-60LE835X
LC40LE835_book.indb 76LC40LE835_book.indb 76 10/7/2011 12:05:05 PM10/7/2011 12:05:05 PM
Dimensions do not include protrusions such as screws and some parts.
LC-52LE835X
Dimensional drawings
LC-46LE835X
LC40LE835_book.indb 77LC40LE835_book.indb 77 10/7/2011 12:05:06 PM10/7/2011 12:05:06 PM
Dimensions do not include protrusions such as screws and some parts.
LC-40LE835X
Page
Page
Page
NEW ZEALAND
SHARP CUSTOMER SERVICES
AUSTRALIA
SHARP APPROVED SERVICE CENTRE
www.sharp.net.au
1300 135 022
SHARP APPROVED SERVICE CENTRE
www.sharp.net.nz