Useful viewing functions
Individual setting – Time | E Switching the multi audio languages |
Each time you press MPX on the remote control unit, the | |
| audio language switches. |
View setting
Time display
NOTE
•This function depends on audio language information from broadcasters.
•If audio for the selected language is not included in a received broadcast, audio will not be output for that language.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Time display”.
Time display
This function allows you to display the clock time in the
| Item | |
On | Displays the clock time. | |
|
| |
On | Displays the clock time in | |
increments. | ||
| ||
|
| |
Off | Hides the clock time. | |
|
|
NOTE
•Time information is available when channel time information including the teletext information is obtained in the “TV” mode.
Time format
You can select the time format (either “24HR” or “AM/ PM”) for the clock time.
NOTE
•The displayed time may differ depending on the programmes because of the programme information.
View setting
Time zone
This function enables you to select your local time zone.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” >“Individual setting” > “Time zone”.
NOTE
•This function lets you select the right time zone in case the time displayed in the EPG does not match the local time of your area.
•When the country setting is set to “Australia” or “Indonesia”, this function is available. When the country setting is set to “Singapore”, “New Zealand” or “Malaysia”, this function is not available.
View setting
Subtitle
Set up to two preferred subtitle languages (including subtitles for the hearing impaired) to display if subtitles are available.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Subtitle”.
Selectable items
E1st language E 2nd language
E For hearing impaired
E Switching subtitle languages
Each time you press [ on the remote control unit, the subtitle switches.
Off |
| 1st language |
|
2nd language
E Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over each of the subtitle language settings (e.g., “1st language”, “2nd language”, etc.).
EXAMPLE
1st language |
| 1st language |
|
(For hearing impaired)
NOTE
•Subtitles will not be displayed when the programme does not contain subtitle information.
•Subtitles may not be displayed in 3D mode.
View setting
Language
Individual setting – Language
View setting
Digital audio language
Set up to three preferred multi audio languages to display if the audio languages are available.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”.
You can select an OSD language. Refer to the OSD language column in the specification table for the selectable languages (Page 73).
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Language”.
39
