Connecting external devices

Audio connections

Speaker/amplifier connection

Connect an amplifier with external speakers as shown below.

E Connecting an amplifier with digital/ analogue audio inputs

o

NOTE

Optical digital audio will be output in 2-ch stereo when it is from the external equipment connected to the TV using an HDMI cable.

If the image is not in sync with the audio, check the settings of the connected surround system.

E After connecting

Digital audio output setting

After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio output format compatible with the programme you are watching or the device connected.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital audio output” > select “PCM” or “Dolby Digital”.

NOTE

When set to “Dolby Digital”, Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When set to “PCM”, PCM is output no matter what audio formats are received.

When set to “Dolby Digital”, HE-AAC audio formats can be output as Dolby Digital.

n

Optical audio cable (for digital audio) (commercially available)

Stereo conversion cable (for analogue audio) (commercially available)

*This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing.

Notice

When connecting an optical audio cable to the DIGITAL AUDIO OUTPUT terminal, check the direction carefully, and insert it straight in while aligning the bottom side. Forcing it could cause damage to the

*1

(*1)

Turn the flat surface aligning the jack shape and insert it straightly.

*2

(*2)

 

(Drawing from a side view)

Do not insert upside-down.

Do not twist when inserting.

Do not insert sideways.

28

Page 30
Image 30
Sharp LC-60LE835X Audio connections, Speaker/amplifier connection, After connecting, Digital audio output setting