Basic adjustment

Analogue setting

1Repeat steps 1 and 2 in Digital setting.

2The “Analogue setting” screen displays, and then press A.

3Repeat steps 4 and 5 in Digital setting.

NOTE

The “Analogue setting” menu is available only for watching TV in ATV mode.

Additional search

Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed.

Start searching channels after selecting the colour system and sound system.

Manual adjust

You can reconfigure the analogue TV channels settings automatically or manually.

After selecting “Yes” on the screen, press a/b/ c/d to select the channel you want to set and then press A.

Programme Setup “Manual Adjust” menu

Sound sys.

Select the optimum sound systems (broadcasting systems) to receive (“B/G”, “D/K”, “I”, “M”).

NOTE

Check the sound system if the sound output were not correct.

Label

When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually.

Select each character of the new name for the channel with using the software keyboard (see page 14).

NOTE

The name can be five characters or less. Select “Cancel” to set the channel name.

Skip

Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV.

Next

You can select one of the following settings.

Lock

You can block the viewing of any channel.

NOTE

See page 38 for setting a password.

When “Lock” is set to “On” for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked.

When pressing Cwhile “Child lock has been activated” displays, the password input window will display. Inputting the correct password unlocks the “Password” temporarily until the power is turned off.

Search

You can add a new channel within a specified frequency band.

 

Item

Next

Search the next channel.

 

 

Store

Memorise the current display channel.

 

 

Cancel

Return to the previous screen (the search

result will not be stored).

 

 

 

Fine

You can adjust the frequency to the desired position.

NOTE

Adjust while checking the background picture as a reference.

Instead of pressing c/d to adjust the frequency, you can set by directly entering the frequency number of the channel with 09numeric buttons.

When setting a frequency on the “Fine” screen, the last figure of the frequency needs to be “0” or “5”.

EXAMPLE

179.25 MHz: Press 1 > 7 > 9 > 2 > 5.

49.25 MHz: Press 4 > 9 > 2 > 5 > A.

Colour sys.

Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”).

Sort

Channel positions can be sorted freely.

1Press c/d to select “Yes”, and then press

A.

2Press a/b/c/d to select the channel you want to move, and then press A.

3Press a/b/c/d to move it to the desired position, and then press A.

4Repeat steps 2 and 3 until all desired channels are sorted.

Erase programme

Channels can be erased individually.

1Press c/d to select “Yes”, and then press

A.

2Press a/b/c/d to select the channel you want to erase, and then press A.

• A message window pops up.

3Press c/d to select “Yes”, and then press Ato erase the selected channel. All the subsequent channels move up.

4Repeat steps 2 and 3 until all desired channels are

erased.

37

Page 39
Image 39
Sharp LC-60LE835X operation manual Basic adjustment Analogue setting, Sort, Erase programme