67
Configuring Multiple Static IP Addresses
This chapter describes how to configure the 3700HGV-B for use with multiple service provider-assigned
(static) broadband IP addresses on the SBC Lightspeed network.
To use multiple broadband addresses with the 3700HGV-B, you must have subscribed to the appropriate
service from your Internet Service Provider. In addition, you need the IP address and networking information
that has been identified for the subscribed service.
The configuration process is divided into three steps.
1. Enable the Public Network function of the 3700HGV-B and configure it with the appropriate router IP
address and subnet mask.
2. Assign the broadband IP address(es) to the desired network devices.
3. (Optional) Configure firewall rules to direct unsolicited traffic to the associated network devices.