3Com 10014302 manual isdn spid1, isdn spid2, Syntax, View, Parameter, Description, Example

3Com Router Command Reference Guide Addendum for V1.2

6.14 isdn spid1

Syntax

isdn spid1 spid

undo isdn spid1

View

ISDN BRI Interface view

Parameter

spid: String comprising 9 to 20 digits.

Description

Using the isdn spid1 command, you can configure SPID information for the B1 channel on an NI-compliant BRI interface. Using the undo isdn spid1 command, you can remove the SPID information form the B1 channel on the interface.

On a BRI interface compliant with the ISDN protocol in North America, calls can be placed only after the SPID negotiation or initialization is finished. SPID information can be obtained via static configuration or dynamic negotiation. Only after SPID information is configured for the B1 channel on the BRI interface can the system make the L3 initialization to place calls.

By default, SPID for the B1 channel on a BRI interface is null.

This command applies only on NI-compliant BRI interfaces.

Example

Set SPID to “012345” for the B1 channel on the interface bri0.

[3Com-bri0] isdn spid1 012345

6.15 isdn spid2

Syntax

isdn spid2 spid

undo isdn spid2

100