Ntp-service reliable authentication-keyid, Example | 3Com 10014302

3Com Router Command Reference Guide Addendum for V1.2

stratum: The stratum level at which the local clock operates, which is in the range of 1 to 15.

Description

Using the ntp-servicerefclock-mastercommand, you can set an external reference clock or the local clock to be the NTP master clock. Using the undo ntp-servicerefclock-mastercommand, you can remove the settings of NTP master clock.

X.X.X.X is not specified, and stratum is 1.

This command can set an external reference clock or local clock as the NTP master clock providing reference for time synchronization of other devices. X.X.X.X represents the IP address, that is, 127.127.t.u, of the reference clock. If it has not been specified, the local clock works as the NTP master clock by default. With this command, you can specify the stratum level where the NTP master clock operates.

Example

Set the local device to be the NTP master clock at stratum 3, which provides reference for the time synchronization of other peers.

[3Com] ntp-service refclock-master 3

4.14 ntp-service reliable authentication-keyid

Syntax

ntp-service reliable authentication-keyid number

undo ntp-service reliable authentication-keyid number

View

System view

Parameter

number: Key number in the range of 1 to 4294967295.

Description

Using the ntp-service reliable authentication-keyid command, you can specify a key to be reliable. Using the undo ntp-service reliable authentication-keyid command, you can remove the current setting.

By default, no reliable authentication key is set.

78

Image 78

3Com 10014302 manual ntp-service reliable authentication-keyid, Description, Example, Syntax, View, Parameter

Contents

Command Reference Guide Addendum for 3Com RouterPublished January Download the 3Com Router Command Reference Guide from Download the Router 3000 Installation Guide fromDownload the Router 5000 Installation Guide from Download the 3Com Router Configuration Guide from Syntax Chapter 1 CBQ Configuration Commands1.1 af View 1.2 car car cir rate cbs size ebs size conform action exceed actionundo car 1.3 debugging qos number 1.4 display qos cbq interface display qos cbq interface type number display qos class class-name 1.5 display qos class1.6 display qos policy display qos policy policy-name class class-name 3Com display qos policy 1.7 display qos policy interface display qos policy interface type number inbound outbound Behaviors Default Queue Flow Based Fair Queueing 1.8 ef ef bandwidth bandwidth cbs size undo ef 1.9 gts gts cir rate cbs size ebs size queue-length length undo gts 1.10 if-match acl if-match logic-not acl acl-numberundo if-match logic-not acl acl-number 1.11 if-match any access-list-number ACL numberif-match logic-not any undo if-match logic-not any 1.12 if-match class if-match logic-not class class-nameundo if-match logic-not class class-name 1.13 if-match criteria if-match logic-not criteria undo if-match logic-not criteria number Interface number 1.14 if-match inbound-interface1.15 if-match ip-dscp if-match logic-not inbound-interface type number 1.16 if-match ip-precedence if-match logic-not ip-precedence value value …undo if-match logic-not ip-precedence value value … 1.17 if-match mac-address if-match logic-not destination-mac source-mac mac-addressundo if-match logic-not destination-mac source-mac mac-address 1.18 if-match protocol if-match logic-not protocol ipundo if-match logic-not protocol ip qmtoken token-number 1.19 if-match rtp1.20 qmtoken undo qmtoken 1.21 qos apply policy 1.22 qos class qos class logic-and logic-or class-nameundo qos class logic-and logic-or class-name 1.23 qos max-bandwidth qos max-bandwidth kilobits undo qos max-bandwidth 1.24 qos policy qos policy policy-name undo qos policy policy-name 1.25 qos reserved-bandwidth qos reserved-bandwidth pct percent undo qos reserved-bandwidth qos-class class-name undo qos-class class-name 1.26 qos-class1.27 queue-length queue-length queue-length undo queue-length queue-length 1.28 remark ip-dscp remark ip-dscp value undo remark ip-dscp value 1.29 remark ip-precedence remark ip-precedence value undo remark ip-precedence value wfq queue-number total-queue-number 1.30 wfq1.31 wred undo wfq discard-prob 1.32 wred ip-dscpundo wred ip-dscp ip-precedence undo wred ip-dscp dscp-value Description 1.33 wred ip-precedence undo wred ip-precedence value 1.34 wred weighting-constant wred weighting-constant exponent undo wred weighting-constant Chapter 2 TACACS+ Configuration Commands 2.1 debugging hwtacacsinterface-type interface-number Interface name and number 2.2 display hwtacacs accounting Example 2.3 display hwtacacs server 2.4 domain For a related command, see reset hwtacacs server statisticsdomain undo domain 2.5 host Parameter Warning Reach the max limited of server in one template 2.6 hwtacacs-server template reset hwtacacs accounting statistics 2.7 reset hwtacacs accounting statistics2.8 reset hwtacacs server statistics reset hwtacacs server statistics 2.9 shared-key shared-key key-string 2.10 source-ip undo source-ip 2.11 timer quiet 3.2 debugging ssh server Chapter 3 SSH Configuration Commands3.1 debugging rsa debugging rsa undo debugging rsa 3.3 display rsa local-key-pair public display rsa local-key-pair public 3Com display rsa local-key-pair public 3.4 display rsa peer-public-key display rsa peer-public-key brief name keyname 3.5 display ssh server display ssh server status session display ssh user-information username 3.6 display ssh user-information3.7 hex hex hex-data D6C54A36 3.8 kill ssh kill ssh all userID userid 3.9 protocol inbound protocol inbound ssh telnet numbers acl acl-number 3.10 public-key-code begin public-key-code begin 3.11 public-key-code end public-key-code end 3.12 rsa local-key-pair create rsa local-key-pair create 3.13 rsa local-key-pair destroy rsa local-key-pair destroy 3.14 rsa peer-public-key rsa peer-public-key key-name undo rsa peer-public-key key-name 3.15 ssh server authentication-retries ssh server authentication-retries timesundo ssh server authentication-retries ssh server timeout seconds undo ssh server timeout 3.17 ssh server timeout3.16 ssh server rekey-interval ssh server rekey-interval hours undo ssh server rekey-interval 3.18 ssh user username assign rsa-key ssh user username assign rsa-key keynameundo ssh user username assign rsa-key 3.19 ssh user authentication-type ssh user username authentication-type password RSA allundo ssh user username authentication-type password RSA all 3Com ssh user smith authentication-type password Chapter 4 NTP Configuration Commands 4.1 debugging ntp-service 4.2 display ntp-service sessions display ntp-service sessions verbose 4.3 display ntp-service status display ntp-service status 4.4 display ntp-service trace display ntp-service trace 4.5 ntp-service access ntp-service access query synchronization server peer acl-numberundo ntp-service access query synchronization server peer ntp-service authentication enable 4.6 ntp-service authentication enable4.7 ntp-service authentication-keyid undo ntp-service authentication enable 4.8 ntp-service broadcast-client ntp-service broadcast-client undo ntp-service broadcast-client 4.9 ntp-service broadcast-server ntp-service max-dynamic-sessions number 4.10 ntp-service max-dynamic-sessions4.11 ntp-service multicast-client undo ntp-service max-dynamic-sessions 4.12 ntp-service multicast-server undo ntp-service multicast-server 4.13 ntp-service refclock-master 4.14 ntp-service reliable authentication-keyid ntp-service reliable authentication-keyid numberundo ntp-service reliable authentication-keyid number 4.15 ntp-service source-interface undo ntp-service source-interface 4.16 ntp-service source-interface disable 4.17 ntp-service unicast-peer undo ntp-service unicast-peer 4.18 ntp-service unicast-server undo ntp-service unicast-server 3Com ntp-service unicast-server 128.108.22.44 version 5.2 display x25 x2t route Chapter 5 X2T Configuration Commands5.1 debugging x25 x2t debugging x25 x2t all event packet display x25 x2t switch-table 5.3 display x25 x2t switch-table5.4 translate ip translate ip ip-address port port-number x25 x.121-address 5.5 translate undo translate ip ip-address port port-number Routertranslate x25 12322 ip 10.110.54.19 port Chapter 6 Additional ISDN Configuration Commands 6.1 isdn ignore callednum 6.2 isdn ignore hlc 3Com-E1-0 interface serial 215 3Com-serial215 isdn ignore callednum 6.3 isdn ignore llc 6.4 isdn waitconnectack View 6.5 display isdn spidSyntax Parameter 6.6 isdn ignore dchan Example 6.7 isdn protocol-type 6.8 isdn q931-timer undo isdn q931-timer timer-name all 6.9 isdn spid auto-trigger 6.10 isdn spid nit 6.11 isdn spid timer 6.12 isdn spid resend 6.13 isdn spid service 3Com-bri0 isdn spid service data 3Com-bri0/0 isdn spid service speechExample 6.14 isdn spid1 6.15 isdn spid2 3Com-bri0 isdn spid2