3Com 10014302 manual display ntp-service status, Syntax, View, Parameter, Description, Example

3Com Router Command Reference Guide Addendum for V1.2

********************************************************************

[12345]127.127.1.0 LOCAL(0)	7	26	64	1	0.0	0.0	15.6
[5]10.110.101.20 0.0.0.0	16	-	64	0	0.0	0.0	0.0

note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured

4.3 display ntp-service status

Syntax

display ntp-service status

View

All views

Parameter

None

Description

Using the display ntp-service status command, you can display the state information of the NTP service.

Example

Display the state information of the NTP service.

[3Com] display ntp-service status

clock status: synchronized, stratum: 4, reference clock ID: 131.108.13.57

nominal freq: 250.0000 Hz, actual freq: 249.9990 Hz, precision: 2**19

offset: 7.33 ms, reftime: 00:10:22.438 PDT Mon Jul 5 2003 (AFE2525E.70597B34)

root delay : 133.36 ms, root disper: 126.28 ms, peer disper: 5.98 ms

The following table gives the explanation to the displayed information.

Table 4-1Description of the state information of the NTP server

Item	Description
synchronized	The local system is synchronized with a remote NTP server or some clock
	source.
unsynchronized	The local system is not synchronized with any remote NTP server.
stratum	The NTP stratum level at which the local system is operating.
reference	Specify the address of the remote server or ID of the clock source with which
	the local system has synchronized.
nominal freq	The nominal frequency of the hardware clock maintained by the local system
actual freq	The real frequency of the hardware clock maintained by the local system
precision	Precision of the local system clock
reftime	Reference timestamp
offset	The offset of the local clock relative to the NTP server

69