3Com 10014302 manual View, Parameter, Description, Example, 3Com-bri0 isdn spid2

3Com Router Command Reference Guide Addendum for V1.2

View

ISDN BRI Interface view

Parameter

spid: String comprising 9 to 20 digits.

Description

Using the isdn spid2 command, you can configure SPID information for the B1 channel on an NI-compliant BRI interface. Using the undo isdn spid2 command, you can remove the SPID information from the B1 channel on the interface.

On a BRI interface compliant with the ISDN protocol in North America, calls can be placed only after the SPID negotiation or initialization is finished. SPID information can be obtained via static configuration or dynamic negotiation. Only after SPID information is configured for the B1 channel on the BRI interface can the system make the L3 initialization to place calls.

By default, SPID for the B2 channel on a BRI interface is null.

This command applies only on NI-compliant BRI interfaces.

Example

Set SPID to “012345” for the B2 channel on the interface bri0.

[3Com-bri0] isdn spid2 012345

101