Protocol inbound, Syntax, View, Parameter, Example | 3Com 10014302

3Com Router Command Reference Guide Addendum for V1.2

Close the SSH process of task 36 on the router.

[3Com] kill ssh userid 36

3.9 protocol inbound

Syntax

protocol inbound { ssh telnet } numbers [ acl acl-number]

View

System view

Parameter

ssh: Supports SSH.

telnet: Supports Telnet..

numbers: Specifies the maximum number of connections that the protocol is allowed to set up. It is in the range of 0 to 5, with 0 indicating that the protocol is not supported. By default, the allowed maximum number of Telnet connections is 5 and no SSH connection is allowed.

acl acl-number: Specifies the number of a basic ACL for an IP address. It is in the range of 0 to 99, with 0 indicating that no ACL is used.

Description

Using the protocol inbound command, you can specify the protocol and the maximum number of the protocol specific connections that the system supports. .

The maximum number of Telnet connections defaults to 5 and the maximum number of SSH connections defaults to 0.

Given SSH has been enabled but the RSA key has not been configured on the local device, the SSH user will still be unable to pass the login authentication. The configuration result will take effect the next time when the user logs in the system.

Example

Set the system to support three SSH connections and not to adopt ACL.

[3Com] protocol inbound ssh 3

56

Image 56

3Com 10014302 manual protocol inbound, Syntax, View, Parameter, Description, Example

Contents

Published January Command Reference Guide Addendum for3Com Router Download the Router 3000 Installation Guide from Download the Router 5000 Installation Guide fromDownload the 3Com Router Command Reference Guide from Download the 3Com Router Configuration Guide from Chapter 1 CBQ Configuration Commands 1.1 afSyntax View undo car 1.2 carcar cir rate cbs size ebs size conform action exceed action 1.3 debugging qos number 1.4 display qos cbq interface display qos cbq interface type number 1.5 display qos class 1.6 display qos policydisplay qos class class-name display qos policy policy-name class class-name 3Com display qos policy 1.7 display qos policy interface display qos policy interface type number inbound outbound Behaviors Default Queue Flow Based Fair Queueing 1.8 ef ef bandwidth bandwidth cbs size undo ef 1.9 gts gts cir rate cbs size ebs size queue-length length undo gts undo if-match logic-not acl acl-number 1.10 if-match aclif-match logic-not acl acl-number if-match logic-not any undo if-match logic-not any 1.11 if-match anyaccess-list-number ACL number undo if-match logic-not class class-name 1.12 if-match classif-match logic-not class class-name 1.13 if-match criteria if-match logic-not criteria undo if-match logic-not criteria 1.14 if-match inbound-interface 1.15 if-match ip-dscpnumber Interface number if-match logic-not inbound-interface type number undo if-match logic-not ip-precedence value value … 1.16 if-match ip-precedenceif-match logic-not ip-precedence value value … undo if-match logic-not destination-mac source-mac mac-address 1.17 if-match mac-addressif-match logic-not destination-mac source-mac mac-address undo if-match logic-not protocol ip 1.18 if-match protocolif-match logic-not protocol ip 1.19 if-match rtp 1.20 qmtokenqmtoken token-number undo qmtoken 1.21 qos apply policy undo qos class logic-and logic-or class-name 1.22 qos classqos class logic-and logic-or class-name 1.23 qos max-bandwidth qos max-bandwidth kilobits undo qos max-bandwidth 1.24 qos policy qos policy policy-name undo qos policy policy-name 1.25 qos reserved-bandwidth qos reserved-bandwidth pct percent undo qos reserved-bandwidth 1.26 qos-class 1.27 queue-lengthqos-class class-name undo qos-class class-name queue-length queue-length undo queue-length queue-length 1.28 remark ip-dscp remark ip-dscp value undo remark ip-dscp value 1.29 remark ip-precedence remark ip-precedence value undo remark ip-precedence value 1.30 wfq 1.31 wredwfq queue-number total-queue-number undo wfq 1.32 wred ip-dscp undo wred ip-dscp ip-precedencediscard-prob undo wred ip-dscp dscp-value View 1.33 wred ip-precedence undo wred ip-precedence value 1.34 wred weighting-constant wred weighting-constant exponent undo wred weighting-constant interface-type interface-number Interface name and number Chapter 2 TACACS+ Configuration Commands2.1 debugging hwtacacs 2.2 display hwtacacs accounting Example 2.3 display hwtacacs server domain undo domain 2.4 domainFor a related command, see reset hwtacacs server statistics 2.5 host Parameter Warning Reach the max limited of server in one template 2.6 hwtacacs-server template 2.7 reset hwtacacs accounting statistics 2.8 reset hwtacacs server statisticsreset hwtacacs accounting statistics reset hwtacacs server statistics 2.9 shared-key shared-key key-string 2.10 source-ip undo source-ip 2.11 timer quiet Chapter 3 SSH Configuration Commands 3.1 debugging rsa3.2 debugging ssh server debugging rsa undo debugging rsa 3.3 display rsa local-key-pair public display rsa local-key-pair public 3Com display rsa local-key-pair public 3.4 display rsa peer-public-key display rsa peer-public-key brief name keyname 3.5 display ssh server display ssh server status session 3.6 display ssh user-information 3.7 hexdisplay ssh user-information username hex hex-data D6C54A36 3.8 kill ssh kill ssh all userID userid 3.9 protocol inbound protocol inbound ssh telnet numbers acl acl-number 3.10 public-key-code begin public-key-code begin 3.11 public-key-code end public-key-code end 3.12 rsa local-key-pair create rsa local-key-pair create 3.13 rsa local-key-pair destroy rsa local-key-pair destroy 3.14 rsa peer-public-key rsa peer-public-key key-name undo rsa peer-public-key key-name undo ssh server authentication-retries 3.15 ssh server authentication-retriesssh server authentication-retries times 3.17 ssh server timeout 3.16 ssh server rekey-intervalssh server timeout seconds undo ssh server timeout ssh server rekey-interval hours undo ssh server rekey-interval undo ssh user username assign rsa-key 3.18 ssh user username assign rsa-keyssh user username assign rsa-key keyname undo ssh user username authentication-type password RSA all 3.19 ssh user authentication-typessh user username authentication-type password RSA all 3Com ssh user smith authentication-type password Chapter 4 NTP Configuration Commands 4.1 debugging ntp-service 4.2 display ntp-service sessions display ntp-service sessions verbose 4.3 display ntp-service status display ntp-service status 4.4 display ntp-service trace display ntp-service trace undo ntp-service access query synchronization server peer 4.5 ntp-service accessntp-service access query synchronization server peer acl-number 4.6 ntp-service authentication enable 4.7 ntp-service authentication-keyidntp-service authentication enable undo ntp-service authentication enable 4.8 ntp-service broadcast-client ntp-service broadcast-client undo ntp-service broadcast-client 4.9 ntp-service broadcast-server 4.10 ntp-service max-dynamic-sessions 4.11 ntp-service multicast-clientntp-service max-dynamic-sessions number undo ntp-service max-dynamic-sessions 4.12 ntp-service multicast-server undo ntp-service multicast-server 4.13 ntp-service refclock-master undo ntp-service reliable authentication-keyid number 4.14 ntp-service reliable authentication-keyidntp-service reliable authentication-keyid number 4.15 ntp-service source-interface undo ntp-service source-interface 4.16 ntp-service source-interface disable 4.17 ntp-service unicast-peer undo ntp-service unicast-peer 4.18 ntp-service unicast-server undo ntp-service unicast-server 3Com ntp-service unicast-server 128.108.22.44 version Chapter 5 X2T Configuration Commands 5.1 debugging x25 x2t5.2 display x25 x2t route debugging x25 x2t all event packet 5.3 display x25 x2t switch-table 5.4 translate ipdisplay x25 x2t switch-table translate ip ip-address port port-number x25 x.121-address 5.5 translate undo translate ip ip-address port port-number Routertranslate x25 12322 ip 10.110.54.19 port Chapter 6 Additional ISDN Configuration Commands 6.1 isdn ignore callednum 6.2 isdn ignore hlc 3Com-E1-0 interface serial 215 3Com-serial215 isdn ignore callednum 6.3 isdn ignore llc 6.4 isdn waitconnectack 6.5 display isdn spid SyntaxView Parameter 6.6 isdn ignore dchan Example 6.7 isdn protocol-type 6.8 isdn q931-timer undo isdn q931-timer timer-name all 6.9 isdn spid auto-trigger 6.10 isdn spid nit 6.11 isdn spid timer 6.12 isdn spid resend Example 6.13 isdn spid service3Com-bri0 isdn spid service data 3Com-bri0/0 isdn spid service speech 6.14 isdn spid1 6.15 isdn spid2 3Com-bri0 isdn spid2