3Com 10014302 manual isdn spid nit, Parameter, Description, Example, Syntax, View

3Com Router Command Reference Guide Addendum for V1.2

Parameter

None

Description

Using the isdn spid auto-triggercommand, you can enable SPID auto-negotiation once on the BRI interface running the NI protocol.

On a BRI interface compliant with the North American ISDN protocol, the router can place a call only after SPID negotiation or initialization. SPID information can be obtained via static configuration or dynamic negotiation. You may manually trigger a new SPID negotiation request by executing this command if the SPID negotiation in dynamic negotiation fails or just for the purpose of testing.

By default, a BRI interface does not originate a SPID negotiation request unless triggered by a call.

This command applies only on the BRI interface running the NI protocol.

Example

Manually trigger a new SPID negotiation request on the interface bri0.

[3Com-bri0] isdn spid auto-trigger

6.10 isdn spid nit

Syntax

isdn spid nit

undo isdn spid nit

View

ISDN BRI Interface view

Parameter

None

Description

Using the isdn spid nit command, you can set the SPID processing mode to NIT (Not Initial Terminal) on an NI-compliant BRI interface. Using the undo isdn spid nit command, you can disable the NIT mode on the BRI interface.

96