3Com 10014302 manual display ntp-service sessions, Description, Example, Syntax, View, Parameter

3Com Router Command Reference Guide Addendum for V1.2

Description

Using the debugging ntp-servicecommand, you can debug all the information of the NTP service. Using the undo debugging ntp-servicecommand, you can disable the specified debugging.

By default, debugging of all the information is disabled.

Example

Enable NTP access control debugging.

[3Com] debugging ntp-service access

4.2 display ntp-service sessions

Syntax

display ntp-service sessions [ verbose ]

View

All views

Parameter

verbose: Specifies to or not display the details of sessions.

Description

Using the display ntp-service sessions command, you can display the state information of all the sessions maintained by the NTP service of the local device.

By default, the state information of all the sessions maintained by the NTP service of the local device is displayed.

Without the argument verbose, the command will display only the brief information of the all the sessions maintained by the local device.

With the argument verbose, the command will display the details of the all the sessions maintained by the local device.

Example

Display the information of the sessions maintained by the NTP service at the local device.

[3Com] display ntp-service sessions

source refid st now poll reach delay offset dis

68