3Com 10014302 manual isdn spid resend, Example, Syntax, View, Parameter, Description

3Com Router Command Reference Guide Addendum for V1.2

This command applies only on NI-compliant BRI interfaces.

Example

Set the duration of TSPID on the interface bri0 to 50 seconds.

[3Com-bri0] isdn spid timer 50

6.12 isdn spid resend

Syntax

isdn spid resend times

undo isdn spid resend

View

ISDN BRI Interface view

Parameter

times: An integer in the range of 1 to 255 times, which defaults to 1.

Description

Using the isdn spid resend command, you can set the number of INFORMATION message retransmission attempts for SPID negotiation or initialization on an NI-compliant BRI interface. Using the undo isdn spid resend command, you can restore the default number of INFORMATION message retransmission attempts on the interface.

On a BRI interface compliant with the ISDN protocol in North America, calls can be placed only after the SPID negotiation or initialization is finished. The timer TSPID is started when the terminal originates a negotiation or initialization request by sending the INFORMATION message. If the terminal does not receive any response upon the expiration of TSPID, it will retransmit the INFORMAITON message. You can use this command to modify the number of INFORMATION message retransmission attempts.

This command applies only on NI-compliant BRI interfaces.

Example

Set the allowed number of INFORMATION retransmission attempts to five.

[3Com-bri0] isdn spid resend 5

98