3Com 10014302 manual debugging qos, Example, Syntax, View, Parameter, number

3Com Router Command Reference Guide Addendum for V1.2

For the related command, see qos policy, qos-class.

Example

Configure traffic monitoring for a class. The normal traffic of packets is 38400bit/s. Burst traffic twice of the normal traffic can pass initially and later the traffic is transmitted normally when the rate does not exceed 38400bit/s. When the rate exceeds 38400bit/s, the precedence of the packet turns to 0 and the packet is transmitted.

[3Com] qos policy 3Com

[3Com-qospolicy-3Com] qos-class database

[3Com-qospolicy-c-3Com database] car cir 38400 cbs 76800 ebs 0 conform pass

exceed remark-prec-pass 0

1.3 debugging qos

Syntax

debugging qos { { cbq { af be ef class } } cq pq wfq } [ interface type

number ]

undo debugging qos { { cbq { af be ef class } } cq pq wfq } [ interface type

number ]

View

All views

Parameter

cbq af: Enable the debugging of confirming forwarding information in CBQ.

cbq be: Enable the debugging of best-effort forwarding information in CBQ.

cbq ef: Enable the debugging expedited-forwarding information in CBQ.

cbq class: Enable the debugging of the class information of CBQ.

cq: Enable the debugging of the CQ.

pq: Enable the debugging of the PQ.

wfq: Enable the debugging of the WFQ.

interface type number: Enable the debugging of the interface QoS. If this parameter is not used, the QoS debugging of all interfaces will be enabled.

5