3Com 3CRWE52196 manual LAN Settings LAN IP Address Screen

38CHAPTER 4: RUNNING THE SETUP WIZARD

6IP settings must be used when establishing a PPTP connection. Fill in the Initial IP Address and the Initial Subnet Mask fields if your ISP has provided you with these settings. Alternatively, if the PPTP server is located in your DSL modem, click Suggest to select an IP address on the same subnet as the PPTP server.

LAN Settings Figure 23 LAN IP Address Screen

This screen displays a suggested LAN IP address and subnet mask of the

Gateway. It also allows you to change the IP address and subnet mask.

DHCP The Gateway contains a Dynamic Host Configuration (DHCP) server that can automatically configure the TCP/IP settings of every computer on your network.

Figure 24 DHCP Server Setup Screen

To activate the DHCP Server option, select Enable the DHCP server with the following settings: and specify the IP pool range. The largest available continuous IP pool will be automatically entered; if this is not appropriate,