AUPGRADING VCX SOFTWARE
Upgrading VCX
Software To upgrade the VCX software on a VCX Connect 100 or VCX Connect
200 server, follow the instructions located in Appendix B of the VCX
Maintenance Manual.
CAUTION: VCX servers other than VCX Connect servers cannot be
upgraded to run VCX Connect software. VCX Connect software upgrades
can be done only from one version of VCX Connect to a more recent
version of VCX Connect.
CAUTION: If you are connecting to the VCX Connect server using the ssh
(secure shell) utility, you will lose your connection to the server when the
server reboots. Typically, you will be able to reconnect to the server before
the upgrade to the new VCX software release has been completed (the
additional time required is a few minutes). Do not perform any function
on the server until the upgrade has been completed.
To verify that the VCX Connect server upgrade has been completed, enter
this command:
vcx-showversion
The output from this command is the current version of VCX Linux.
Repeat this command as necessary until you see the new version.