System Administrator’s Guide U42252-J-Z915-1-76
NSR-ORA and NetApp Configuring NSR-ORA
Scenario 3: Seven Backups per Day
In this scenario NetWorker performs seven backups per day: Every four hours
a snapshot backup is performed. Additionally another snapshot with an
additional tape backup is started at 23:50 h.
Two NetWorker groups are generated automatically:
●one group for tape backups:
–Interval: 24 h
–Level: full
–Start: 23:50
–Name: <ORACLE_SID>_NDMP
●one group for pure snapshot backups:
–Interval: 4 h
–Level: 1
–Start: 10:00
–Name: <ORACLE_SID>_SNAP_INTERVAL
6.4.3 Defining the NDMP Client
After performing the configuration with configure_networker the administrator
must create an additional client resource manually with NetWorker to define the
communication with the NetApp Filer.
This client resource must be created with following attributes:
●Save set attribute
You should use /vol/vol0 as the save set.
●Remote access attribute
To allow the database server to start an NDMP backup, the database server
must be entered into the attribute Remote access.
This means, the database host must be entered as a client with Remote
access rights.
●User attribute
For an NDMP backup the NDMP client needs the name of the NDMP user
for the NetApp Filer (usually root). This name must be entered into the
attribute Remote user.