Menu Displays, Main Menu/Locate Menu, Main Menu Display | 3M 2573

[12]Battery Icon: Indicates battery level.

[13]Speaker Volume Control: Adjusts the volume of the receiver (off, low, medium, high, and xpnd).

[14]Soft Key Commands: Definitions for each of the four soft key functions.

[15]External Jack: Port to connect cables from external devices such as the earth contact frame (A-Frame), a second 3M™ Dyna-Coupler or a toning coil.

[16]Serial Port: RS232 port to connect the receiver to a PC via serial cable or USB-to- Serial Adapter cable.

[17]Earphone Jack: Will fit standard 1/8 inch (3.175 mm) mini-jack mono earphone plug (not included).

4. Menu Displays

A. Main Menu/Locate Menu

When the Menu/OK [5] button is pressed, the display will toggle between the MAIN MENU display and LOCATE MENU display.

The function appears on the display above each soft key [SK].

MAIN MENU Display

LOCATE MENU Display

1.Write Mode: System used to write information to 3M™ iD Markers

2.Data/Template: Displays marker history and template creation/selection displays:

a.Read History – 100 memory locations for Read 3M™ iD Markers

b.Write History – 100 memory locations for written 3M™ iD Markers

c.User Templates – Create and edit iD templates for 3M™ iD Markers (max =32)

d.Trace Templates – Create and edit templates used to identify path (max = 5)

14	78-9000-0192-2 Rev C

Image 14

3M 2573, 2550 manual Menu Displays, Main Menu/Locate Menu, Main Menu Display

Contents

3M Dynatel Cable/Pipe/Fault Locator 2550/2573 Series Contents Aerial Faults Toning Cable Identification Rev C Safety Information Intended Use About This Manual Transmitter Battery Installation Quick Start Receiver Battery Installation Transmitter 2550 Keypad and Connector Definitions Cleaning Receiver and Transmitter UnitsService and Accessories Transmitter 2573Keypad and Connector Definitions Rechargeable Battery Information Maximum Transmitter Output Receiver 2550 Keypad and Display Definitions Rubber cover Receiver Keypad and Display Definitions Receiver Main Menu Display Menu DisplaysMain Menu/Locate Menu Main Menu Display Rev C Selecting Depth Units Configuring The ReceiverSetting the Receiver Clock Selecting a Language Enabling/Disabling Locating Frequencies Selecting Locate Modes Antenna Modes Selecting External Jack Frequencies Tone Frequencies Creating User Defined Frequencies Menu/OK 5Toggle to Main Menu + More SK4 + SK5 + SKc Adjusting Display ContrastSelecting Locating Audio Direct Connect Method Locating Buried Cables And PipesTransmitter Connections Rev C 3M Dyna-Coupler Method Non-SweepingPassive Induction Mode Locating Induction Method Sweeping Active Induction Mode Locating Passive Sweeps One-person Active Induction Mode Sweeps Two-person Active Induction Mode Sweeps Transmitter Set-up Receiver Locating Trace Modes Trace View T-View Special Peak Spl Pk Induction Peak Ind Pk Directional Peak Dir Pk Left of Target Path Directly Over Target Path Directional Null DirNull VOL 13 press up arrow Expanded ModeDepth and Current Estimate Active Frequencies Power FrequenciesLocating Frequencies Passive Frequencies Auxiliary Frequencies Locating in Directional Peak Mode Rev C Locating Active Duct Probes Sondes Determining Active Duct Probe Depth Locating Buried Sheath Faults And Earth Return Faults Transmitter Setup Pinpointing the Buried Fault Rev C Enabling/Disabling Marker Types Alert ModeLocating 3M Electronic Markers and 3M iD Markers Single Marker Locate Dual Marker Locate 3M iD Marker Depth Passive Electronic Marker Non-iD Depth Creating/Editing Templates for 3M iD Markers Creating New Templates Rev C Rev C Editing Templates Menu/OK 5Toggle to Main Menu + Write Mode SK11 Writing 3M iD Markers Rev C Press Menu/OK 5Toggle to Main Menu + Write Mode SK1 Modifying Marker Data to be Written Rev C Rev C Read History Reading 3M iD MarkersReviewing Marker Read/Write History Write History SK Capturing the GPS Coordinates Capture Mode / ModeGPS Compatibility Operation Menu/OK 5Toggle to Main Menu + SK3 + Nmea Path Mapping with GPS Menu/OK 5Toggle to Main Menu + SK3 + GIS Creating Trace Templates Menu/OK 5Toggle to Main Menu + SK3 + GIS SK or PDA SK Transmitter Setup Additional Applications Cable Identification Connection DiagramsTransmitter Setup Menu/OK 5Toggle to Main Menu + More SK4 + SK7 Help ModeReceiver Setup Menu/OK 5Toggle to Main Menu + More SK4 + S/N# SK6 Dynatel PC Tool Kit and Locator Software UpgradesSelf Test of Receiver Product Description Product Description And Optional AccessoriesStandard Configurations Locator Coupler Accessory Kit, 6 150 mm 1196/C Optional 3M Accessories for 3M Dynatel LocatorsLocator Coupler Accessory Kit, 4.5 114 mm 4519 2876 Receiver Specifications Specification Detection Depth 3M Non-iD Passive Watt Transmitter Specifications Meter mode can display a fault resistance up to 10M Ω Environmental and Regulatory Specifications Rechargeable Battery Information Rev C Electrical Markets Division Important Notice