18 78-9000-0192-2 Rev C
D. Enabling/Disabling Locating Frequencies
Menu/OK [5:Toggle to MAIN MENU] + >>More [SK:4] + [SK:5] + >>More [SK:d] +
LocateFreq[SK:f]
The user can select the frequencies that the receiver will detect. All the available
frequencies are listed in four groups (Left to Right: Active, Power, Passive, and
Auxiliary). The Auxiliary group also contains the User Defined Frequencies. (See 5G.
Creating User Defined Frequencies.) The box below the Auxiliary group allows the
selection of filtering for 50 Hz or 60 Hz passive signals when User Defined frequencies
have been chosen for locating.
• Press the right arrow [SK] to move the highlight
bar to the section of frequencies to enable, or
disable.
• Press the up/down arrows [SK] to highlight the
specific frequency.
• Press Enabl/Disabl [SK]. (Enable denoted by )
• Repeat steps 2 & 3 to enable/disable other
frequencies.
• Press Menu/OK [5] to save.
E. Selecting Locate Modes (Antenna Modes)
Menu/OK [5: Toggle to MAIN MENU] + More>> [SK:4] + [SK:5] + More>> [SK:d] + Locate
Modes [SK:e]
The user can select the locate modes (antenna modes) that the receiver utilizes. There
are five locate modes that are available; Trace View (T-View), Directional Peak (Dir Pk),
Directional Null (DirNull), Special Peak (Spl Pk) and Induction Peak (Ind Pk).
All five modes are activated when shipped. The user can deactivate any of the modes
that will not be used.
• Press the up/down arrows [SK] to highlight a
specific locate mode in the first column.
• Press the right arrow [SK] to move the highlight
bar to the second column, or back to the first
column.
• Press Enabl/Disabl [SK]. (Enable denoted by )
• Repeat steps 2 & 3 to enable/disable other locate
modes.
• Press Menu/OK [5] to save.