Maintenance | 3M™ Digital WallDisplay |
|
|
5a. Hold down this receptacle with your left thumb and (5b) pull connectors out of the receptacle with other hand.
6. Open the latch by moving the metal lever to the left.
7.While holding the latch open, grasp the lamp cartridge and pull it straight out of the lamp compartment.
8.Holding the latch open, slide the new lamp cartridge into place.
9.Reconnect black wires to the receptacle.
10.Close the lamp housing door and tighten the screw.
5a 5b
Lever
34 | © 3M 2005. All Rights Reserved. |
