3M 9000PD Image Adj Sub-Menu, Banding, Main Returns to main menu Exit Leaves the menu system

Menu System 3M™ Digital WallDisplay

Image Adj Sub-Menu

The Image Adjustment sub-menu adjusts the projected image settings for the VGA and DVI-D inputs. Use the Vertical Position and Horizontal Position sliders to reposition an image if portions are not visible. Use the Phase and Sync sliders to eliminate vertical banding and noise.

Vertical Position	Adjusts the vertical position of the projected image.
Horizontal Position	Adjusts the horizontal position of the projected image.
Phase	Adjusts the pixel sampling. Use this to reduce image noise and flicker.
Sync	Adjusts the expected pixel number in a single video line. Use this to eliminate
	banding.
Main	Returns to main menu.
Exit	Leaves the menu system.

To open the Image Adj submenu:

1.Open the menu system by pressing the remote control Menu button or any arrow on the Menu Keypad.

2.Select the Image Adj sub-menu by pressing the up or down arrows on the remote control Disk Pad or Menu Keypad.

3.To open the Image Adj sub-menu, press the right arrow of the Disk Pad or Menu Keypad.

4.Scroll to the desired slider and move it to the right or left as needed.

5.Close the menu system by pressing the Menu button or scrolling to Exit and selecting it with the left or right arrow of the Menu Keypad.

To return to the main menu, select Main and press the left or right arrow of the Disk Pad or Menu Keypad.

30 © 3M 2005. All Rights Reserved.