Step 1A: Quick Start Setup Procedures

Storage Device Setup (for Attached Storage Units)

If you have a NAS (SCSI Connected Storage Device or “SAN”) that will be used with the ER, you will need to connect it to the ER at this point. Refer to the Appendix at the end of this document for instructions on how to connect the SCSI Connected Storage Device.

Link the Workstation to the ER

Monitor and Keyboard Setup

A.Connect the PC monitor and keyboard cables to the rear of the chassis.

B.Turn on the PC monitor.

C.Power on the ER by dropping down the face plate and pressing the large button at the right of the front panel (see Fig. 3 for an SL unit, and Fig. 4 for an HL unit).

Once the ER is powered up, proceed to the Login screen instructions.

Serial Console Setup

A.Using the serial port cable (and USB DB9 serial adapter, if necessary), connect the laptop to the rear of the chassis (see Fig. 1 for an SL unit, and Fig. 2 for an HL unit).

B.Power on the laptop.

C.Power on the ER by dropping down the face plate and pressing the large button at the right of the front panel (see Fig. 3 for an SL unit, and Fig. 4 for an HL unit).

Fig. 1 - Portion of SL chassis rear

Fig. 2 - Portion of HL chassis rear

20

8e6 Enterprise Reporter Quick Start Guide

Page 24
Image 24
8e6 Technologies HL-022-002, HL-002-002 Quick Start Setup Procedures, Storage Device Setup for Attached Storage Units