12
12.4Gas-side mainte- nance
12.4.1
Performing maintenance | s |
|
Introduction
The following steps must be carried out on the gas side:
1.Clean the burner(s).
2.Clean the orifice(s).
3.Checking the flue baffles.
12.4.2Clean the burner(s)
1.Detach the burner(s)
2.Remove all contamination present on the burner(s).
3.Fit the burner(s)
12.4.3Clean the orifice(s)
1.Detach the orifice(s)
2.Remove all contamination present in the orifice(s).
3.Fit the orifice(s)
12.4.4Checking the flue baffles
12.5Finalising mainte- nance
Warning
The flue baffles can be hot.
1.Remove the flue baffles from the appliance.
2.Check the flue baffles for the presence of corrosion, removing this if necessary.
3.Check the flue baffles for wear, and replace the flue baffles if necessary.
To finalise the maintenance, carry out the following steps:
1.Fill the appliance (5 "Filling").
2.Start the appliance (9 "Starting and running").
66 | Instruction manual BFM |
