Abocom None user manual Radio On/Off, Export Profile, Delete

Export Profile	Export all credentials to Profile.
Delete	Delete an existing credential. And then select the next credential if exist. If
	there is an empty credential, the driver will select any non-security AP.
PIN	Registrar: Add the AP’s PIN code into the PIN code column, and press the
	device PIN button. It will connect with the AP in two minutes and get IP
	address.
	Enrollee: Input the device’s PIN code into the PIN code column of AP. Start
	AP WPS process and click device PIN button. Then, the device will connect
	to AP in two minutes and get IP address.
PBC	Start to add to AP using PBC (Push Button Configuration) method. Click
	this button to connect the AP which supported WPS function within two
	minutes. Meanwhile, the AP should also click the PBC button
	simultaneously.

Note:

After the users click PIN or PBC, please do not rescan within two minutes of the connection. If users want to stop this setup within the interval, restart PIN/PBC or click "Disconnect" to stop WPS action.

WPS Associate IE

WPS Probe IE

Auto

Progress Bar

Status Bar

Send the association request with WPS IE during WPS setup. It is optional for STA.

Send the probe request with WPS IE during WPS setup. It is optional for STA.

Check this box the device will connect the AP automatically.

Display rate of progress from Start to Connected status. Display currently WPS Status.

Radio On/Off

Click this Radio On/Off button to turn ON or OFF radio function.

This icon shows radio on, click to turn it off.

This icon shows radio off, click to turn it on.

- 27 -