Abocom None user manual Tunnel Authentication

certificate-based and mutual authentication of the client and the network. It relies on client-side and server-side certificates to perform authentication and can be used to dynamically generate user-based and session-based WEP keys to secure subsequent communications between the WLAN client and the access point.

Tunnel Authentication:

•Protocol: Tunnel protocol, List information including EAP-MSCHAP v2 and EAP-TLS/ Smart Card.

•Tunnel Identity: Identity for tunnel.

•Tunnel Password: Password for tunnel.

Session Resumption: Reconnect the signal while broken up, to reduce the packet and improve the transmitting speed. Users can click the box to enable or disable this function.

ID\PASSWORD tab:

ID/ PASSWORD: Identity and password for server.

•Authentication ID / Password: Identity, password and domain name for server. Only "EAP-FAST" and "LEAP" authentication can key in domain name. Domain name can be keyed in blank space.

•Tunnel ID / Password: Identity and Password for server.

Show Password: Check this box to show the passwords that have been entered.

OK: Click to save settings and exit this page.

Cancel: Click to call off the settings and exit.

Client Certification tab:

Users can select Use a certificate on this computer, a client certificate for server authentication. Or users can select Use my smart card to enable the Client Certification function.

- 41 -