Abocom None Power Save Mode RTS Threshold Fragment Threshold Add, System Configuration tab

Power Save Mode

RTS Threshold

Fragment Threshold

Add

Choose from CAM (Constantly Awake Mode) or PSM (Power Saving Mode.)

Shows the RTS Threshold of the device.

Shows the Fragment Threshold of the device.

Click to add a profile from the drop-down screen.

System Configuration tab:

Profile Name: Users can enter profile name, or use default name defined by system. The default is PROF# (#1, #2, #3....).

SSID: The SSID is the unique name shared among all wireless access points in the wireless network. The name must be identical for all devices and wireless access points attempting to connect to the same network. Users can use pull-down menu to select from available access points.

Network Type: There are two types, Infrastructure and Ad hoc modes.

•The Infrastructure is intended for the connection between wireless network cards and an access point. With the Wireless LAN USB Adapter, users can connect wireless LAN to a wired global network via an access point.

•The Ad hoc lets users set a small wireless workgroup easily and quickly. Equipped with the Wireless LAN USB Adapter, users can share files and printers between each PC and laptop.

Tx Power: Transmit power, the amount of power used by a radio transceiver to send the signal out. Select the Tx power percentage from the pull-down list including Auto, 100%, 75%, 50%, 25%, 10% and

Lowest.

Preamble: This function will show up when Ad-hoc network type be selected. A preamble is a signal used in wireless environment to synchronize the transmitting timing including Synchronization and Start

- 38 -