| 85 |
|
|
Error Messages | Corrective Action |
|
|
Parity Check 2 nnnn* | Parity error found in the I/O bus. BIOS attempts to locate |
| the address and display it on the screen. If it cannot locate |
| the address, it displays nnnn. |
|
|
Press <F1> to resume, <F2> | Displayed after any recoverable error message. Press <F1> to |
to Setup, <F3> for previous | start the boot process or <F2> to enter Setup and change |
| the settings. Press <F3> to display the previous screen |
| (usually an initialization error of an Option ROM, i.e., an add- |
| on card). Write down and follow the information shown on |
| the screen. |
|
|
Run the I2O Configuration | One or more unclaimed block storage devices have the |
Utility | Configuration Request bit set in the LCT. Run an I2O |
| Configuration Utility (e.g. the SAC utility). |
|
|
If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Some problems may be solved using the BIOS Setup Utility. See “BIOS Utility” on page 74 for more informations.
