Acer 1600 series manual To exit the Bios Utility, Changing a password, Removing a password

English

76 Software

Changing a password

To change a password, follow step 1 in “Setting a password” on page 75. Enter the current password, then enter a new password. Retype your new password to verify your first entry.

Removing a password

To remove a password, follow step 1 in “Setting a password” on page 75. Enter the current password, then leave the Enter New Password and Cofirm New Password blank.

A note on HT Technology

Hyper-Threading (HT) Technology is only supported by Intel® Pentium® 4 processor running at 3.06 GHz or higher. This technology enables the processor to executes two threads (a part of a program) in parallel. Your software can run more efficiently and you can multitask more effectively.

To enable the HT Technology function, go to the Advanced screen and select the Hyper-Threading item. Press F5 or F6 to enable the function.

To exit the BIOS Utility

To exit the BIOS Utiliy, go the the Exit screen and choose an item and press Enter. Press Enter again to confirm the selection.