5 Under the Extras menu, select Set Printer Password. On the Printer Security screen, enter the new password (numeric values can be set from 0 to 65535), and click on the OK button.

HP JetAdmin Utility (Novell Networks)

1 Run JETADMIN.

2 Select the printer you want to configure. It is listed under its “JetDirect Interface Name” which appears on the self test page/configuration plot.

3 Select Configuration.... The Printer I/O Configuration screen appears.

4Select Advance.... The Advance Settings screen appears.

5Select Lock Printer Control Panel....

6Click on Select... (the Advanced: Printer Security screen appears), then click on the ON button.

7Click the OK button.

ASCII PJL Escape Sequence

Password: send this sequence to the printer from any ASCII editor:

EC %-12345X@PJL JOB

@PJL DEFAULT PASSWORD=[numeric password (0 to 65535)]

@PJL EOJ EC %-12345X

CPLOCK: to turn on or off, assuming that a password has NOT been set, send the following ASCII sequence to the printer:

EC %-12345X@PJL JOB

@PJL DEFAULT CPLOCK=ON [OFF]

@PJL EOJ

EC %-12345X

If a password HAS been set, send the following ASCII sequence to the printer to turn CPLOCK on or off.:

EC %-12345X@PJL JOB PASSWORD=(numeric password)

@PJL DEFAULT CPLOCK=ON(OFF)

@PJL EOJ

EC %-12345X

Configuration 3-19