HP 5m C3917A, C2021A, 5n C3952A, 5 C3916A, 4 plus C2037A, 4 C2001A manual Programming a Flash Simm

Programming a Flash SIMM

A flash SIMM may be programmed while installed in the printer. To program a flash SIMM.

1 Hold down the Menu> , Item< , Value+ , and Select keys while powering on the printer.

2 The printer will display “PROGRAM SLOT 4”. To change the slot number, press Value+/-.

3 Once the desired slot number is displayed, press Select.

4 The printer will display “OK”, followed by “ERASING SIMM.” If the SIMM is correcly earased, the printer will display “START DOWNLOAD.” At this point, you may send the binary file to be flashed to the printer.

5 The 16 characters on the VFD will flash until the download is completed. When the download is completed, power cycle the printer.

LaserJet 5/5M/5N Printer B-29