HP 5 C3916A, C2021A, 5n C3952A, 5m C3917A, 4 plus C2037A Refer to the Product Family Compatibility

Table 7-1	Printer Messages (continued)
Message		Symptoms and Recommendations
53.XY.ZZ ERROR		An error occurred during configuration and validation of
		SIMM memory:
		X Hardware Type:
		0:ROM
		1:RAM
		2:Flash
		Y Hardware Device:
		0: Internal Memory
		1: SIMM Slot 1
		2: SIMM Slot 2
		3: SIMM Slot 3
		4: SIMM Slot 4
		ZZ Error Number:
		0: Unsupported Memory
		1: Unrecognized Memory
		2: Unsupported Memory Size
		3: Failed RAM Test
		4: Exceeded Maximum RAM Size
		5: Exceeded Maximum ROM Size
		6: Invalid SIMM Speed
		7: SIMM Reporting Information Incorrectly
		8: SIMM RAM Parity Error
		LaserJet 4/4m only
		9: SIMM ROM Needs To Be Mapped To An Unsupported
		Address
		10:SIMM Address Conflict
		11:PDC XROM out of bounds
		12:Could not make a temporary mapping
		Replace the SIMM device that caused the error. Pressing
		[Continue]* allows you to continue but the SIMM device that
		caused the error is not configured. If the SIMM device has
		more than one bank of memory, the good banks are
		configured.
*Press Go on the LJ5.
	Refer to the “Product Family Compatibility
N o t e
	Matrix” in Chapter 1, or for the LaserJet 5,
	Appendix B to verify correct memory for the
	printer.

7-6 Troubleshooting