Table |
| Motors |
|
|
|
Motors |
| Description |
|
|
|
M1 | Main Motor (Gear Train Drive Motor) | |
|
|
|
M2 | Paper Input Assembly Drive Motor | |
|
|
|
M3 | ||
|
|
|
M4 | Envelope Feeder Drive Motor | |
|
|
|
M5 | Scanner Motor | |
|
|
|
FM1 | Exhaust Fan Motor | |
|
|
|
Paper Jam Detection
The Input/Registration Sensor (PS1) and the Paper Exit Sensor (PS3) detect paper moving through the printer. If a paper jam is detected, the DC Controller PCA immediately stops the printing process and 13 PAPER JAM or REMOVE PAPER JAM message is displayed. A paper jam can be detected under any of the following conditions:
•Input Paper Delay Jam: When paper does not reach the Input Paper Sensor (PS1) within the required time.
•Input Paper Stationary Jam: When paper does not clear the Input Paper Sensor (PS1) within a specified time.
•Paper Exit Delay Jam: When paper does not reach the Paper Exit Sensor (PS3) within the required time.
•Paper Exit Stationary Jam: When paper does not clear the Paper Exit Sensor (PS3) within a specified time.
•False Paper Jam: If the Rear Door is open, a paper jam message is displayed because PS3 senses a jam.
N o t e | A defective PS5 (Paper End Sensor) can also |
| cause a paper jam when paper is fed from the MP |
| Tray (Tray 1). |
Functional Overview