HP 4 plus C2037A, C2021A, 5n C3952A, 5 C3916A Fuser Gear Cap Removal, Wires in the gear cover slots

Figure 1-45	Fuser Gear Cap Removal
	Before removing the gear cover, note the routing
N o t e
	of the wires in the gear cover slots.

9 Remove the (2) screws from the right side gear cover (see Figure 6-45, callouts 1 and 2). Note the wavy washer on the

(1)screw (callout 1) touching the copper contact. Remove the cover.

10 Remove the Heat Lamp (see Figure 6-45, callout 3), from the roller. Pull the lamp out the side of the assembly.

6-54 Removal and Replacement