HP C2021A, 5n C3952A, 5 C3916A, 5m C3917A, 4 plus C2037A, 4 C2001A manual LaserJet 5 Error Map

Message on LJ 5/5M/5N	Recommendations
INCOMPATIBLE TRAY 3 INSTALLED	Indicates that a lower cassette has been
	installed that is not compatible with the
	LJ5. Press GO to clear the error. The
	tray will not appear in any control panel
	or PJL messages.
INITIALIZING (powerup only)	See 05 SELF TEST
INSTALL TONER CARTRIDGE	See 14 EP CART
INSTALL TRAY 2	See PC INSTALL
INSUFFICIENT MEMORY, JOB CLEARED	See W3 JOB ABORTED
INSUFFICIENT MEMORY, PRINTING AT	See W4/7 JOB 300/[page protect size]
300 DPI
MANUALLY FEED [envelope size]	See ME FEED [envelope size]
MANUALLY FEED [paper size]	See MF FEED [paper size]
MEMORY LOW, PAGE SIMPLIFIED	See W1 IMAGE ADAPT
MEMORY SETTINGS CHANGED	See WM MEM CNFIG N/A or
	WM CHK MEM CNFIG
OFFLINE	See 00 OFFLINE
[personality] MEMORY FULL, STORED	See WM [Personality] MEM FULL
DATA LOST
PLEASE WAIT	This message is displayed whenever the
	device is in the process of flushing the
	pipeline so it can go offline or into the
	menus. (Takes the place of the flashing
	Online indicator.)
POWERSAVE ON	See 00 POWERSAVE
PRINTING CONFIGURATION PAGE	See 05 SELF TEST /
	06 PRINTING TEST
PRINTING DEMO PAGE	See 06 DEMO PAGE
PRINTING FLASH PAGE	This message is displayed while a flash
	file system page is being formatted and
	printed. Upon successful completion, the
	device returns to an online and ready
	state.
PRINTING FONT LIST	See 06 TYPEFACE LIST
PROCESSING JOB	This message is displayed whenever the
	device is actively processing a user’s job.
	(Takes the place of the flashing Ready
	indicator.)
READY	See 00 READY
REMOVE DUPLEX JAM	See 13 DUPLEX JAM

7-B LaserJet 5 Error Map