Assemblies Removal
Power Supply Removal
Figure
1 Remove the Right Side Cover.
2 Remove the (3) or (2) screws from the metal cover at the lower right corner of the printer (see Figure
N o t e | Note which end of the connecting rod is installed |
| into the Power Supply and which end connects |
| into the Rocker Switch. |
3 Remove the Power Switch Connecting Rod (callout 2.)
a lift the rod clear of tab (callout 3), and remove from socket (callout 4).
b Remove the rod from the Rocker Switch at the front of the printer.
(continued on next page)
Removal and Replacement