HP 4 C2001A, C2021A, 5n C3952A, 5 C3916A Control Panel Menus, To change a control panel setting

Control Panel Menus

Figure B-3 shows the menus and menu items available with the basic printer configuration. Not all menu items are discussed in this section. Only those items of specific interest from a service standpoint, or items new to the printers are discussed in this section. If options such as PostScript or a different I/O are installed, the new menu items automatically are added at the appropriate location. For example, a PostScript Menu appears following the PCL Menu.

To change a control panel setting:

1 Press Menu repeatedly until the menu you want appears. 2 Press Item repeatedly until the item you want appears.

3 Press -Value+until the setting you want appears.

4 Press Select to save your selection.

N o t e		An asterisk appears next to your selection in the
		display, indicating that it is now the default.
5 Press Go to exit the menu.
Table B-9		Control Panel Menu for the HP LaserJet 5
		(Refer to Figure B-3)
Reference		Explanation
1	Printing Menu: Lists the current printing and PowerSave settings.
2	PCL Fonts Menu: Lists current font settings.
3	Postscript Menu: List current postscript settings.
4	Job Menu: Lists current settings for print resolution, personality, and I/O
	timeout.
5	Config Menu: List current internal configuration settings of the printer.
6	Mem. Config. Menu: Lists I/O buffer and resource saving buffer settings.
7	Parallel Menu: Lists current settings of the parallel port.
8	Serial Menu: Lists current settings of the serial port.
9	HP MIO Menu: Lists current settings of the MIO card.
10	Reset Menu: Lists reset options available.
11	Test Menu: Lists internal tests available.

LaserJet 5/5M/5N Printer B-13