HP 5 C3916A, C2021A, 5n C3952A, 5m C3917A, 4 plus C2037A, 4 C2001A manual Left Side Fuser Cover

Figure 1-43 Left Side Fuser Cover

5 Remove the (1) Heat Lamp lead (thermoswitch screw)(see Figure 6-43 callout 1).

6 Press the thermoswitch tab towards the paper exit flag to release the tab (see Figure 6-43 callout 2). Slide the Thermoswitch off the fuser frame (see Figure 6-43, callout 3).

7 LaserJet 4: Remove the cable retainer from the fuser frame, and free the heat lamp lead from the cable retainer. Note the orientation of the cable retainer.

LaserJet 4 Plus/5: Remove the (2) screws from the end cover (see Figure 6-43, callouts 4 and 5). Note the wavy washer on the (1) screw touching the copper contact (see Figure 6-43, callout 4). Remove the thermistor connector from the frame and pull apart (see Figure 6-43, callout 6). Note the position of the Fuser Shipping Lever and remove from assembly.

(continued on next page)

6-52 Removal and Replacement