HP 5m C3917A, C2021A, 5n C3952A, 5 C3916A, 4 plus C2037A Figure A-21 Holding Tray Gears and Belt

Figure A-21 Holding Tray Gears and Belt

6 Remove the (1) one-way gear shown in Figure A-21, callout 1.

N o t e	The one-way gear must be reassembled correctly.
	With the gear on the shaft, turn the gear
	clockwise. The shaft should move the belt.
	Turning the gear counter clockwise should result
	in no movement of the shaft and belt.

7 Remove the (1) E-clip from behind the first gear (see Figure A-21, callout 2).

8 Remove the (2) gears shown in Figure A-21, callouts 3 and 4. 9 Slip the belt off the gears.

N o t e Verify proper wire routing when reassembling.

Duplexer A -25