HP 5 C3916A, C2021A, 5n C3952A, 5m C3917A Font Door Cover Removal LJ 5 Right Front Cover Removal

Font Door Cover Removal (LJ 5 Right Front Cover Removal)

Figure 6-8 Font Door Removal (LaserJet 4 shown)

LJ 4/4 Plus

1 Remove the Right Side Cover, the Top Cover,and the PC Tray. 2 Release the top latch (see Figure 6-8, callout 1).

3 Release the (2) lower latches through the access hole in the metal cover (see Figure 6-8, callout 2 and Figure 6-9, callout 1).

4 Remove the Font Door Cover.

N o t e	Figure 6-9 shows the metal side cover removed in
	order to show the Font Door latches. It is not
	necessary to remove the metal side cover to
	remove the Font Door.

LJ 5

1 Remove the right side cover, the top cover, Tray 1 door, and Tray 2.

2 Remove the Right Front Cover retaining screw.

3 Release the top latch. (See Figure 6-8, callout 1)

4 Release the latch halfway down the right side of the cover.

5 Release the (2) lower latches, one through the access hole in the metal cover (see Figure 6-8, callout 2), and one from the bottom of the printer (next to the Tray 2 guide).

6-10 Removal and Replacement