HP C2021A, 5n C3952A, 5 C3916A, 5m C3917A, 4 plus C2037A Thermistor Removal, Thermistor Connector

Thermistor Removal

Figure 1-47 Thermistor Connector

1 Remove the Wire Harness Cover as shown in Figure 6-47.

2 Remove the (2) screws from the thermoswitch connector (see Figure 6-47, callout 1).

3 Release the thermoswitch latch from the paper sensor flag side of the Fuser Assembly (behind the side cover, see Figure 6-47, callout 2).

4 Slide the thermoswitch to the gear side of the fuser and release it from the fuser frame (callout 3).

N o t e	When installing the thermoswitch, make sure the
	sensing surface contacts the fusing roller
	uniformly. If it does not, straighten the leaf
	spring.

(continued on next page)

6-56 Removal and Replacement