High Voltage Contact and Feed Guide Assembly Latches

Removing the High Voltage Contact Assembly and Feed Guide Assembly

N o t e	The following procedures are difficult and the
	components are damaged easily. The tolerances
	between the parts are close and several attempts
	may be necessary before the procedure is
	complete.

Figure 6-56 High Voltage Contact and Feed Guide Assembly Latches

1 Perform all the steps of “Accessing the High Voltage Contact Plate/Feed Guide Assembly” in the order given.

2 Press the tab shown in Figure 6-56 to release the gear cover.

3 Release the (5) latches that hold the Contact Plate in place (see Figure 6-56). Set the Contact Plate on the latch slots.

4 Free the Left Toner Cartridge Guide Assembly from its retainers.

5 Lift the Contactor Plate and the Toner Cartridge Guide Assembly out of the printer, Toner Cartridge Guide Assembly first.