HP 5 C3916A, C2021A, 5n C3952A, 4 C2001A Removing the Covers, Right Side Cover Removal, LJ 4/4 Plus

Removing the Covers

Right Side Cover Removal

Figure 6-2 Right Side Cover Release Points

LJ 4/4 Plus

1 Open the Top Cover and release the Right Side Cover by pressing at the points shown in Figure 6-2.

2 Fold the cover away from the printer to release the bottom supports and lift the door off of the printer frame.

LJ 5

1 Open the Top Cover and loosen the retaining screw on the right side cover located at the upper right rear of the printer.

2 Slide the right side cover back and fold the cover away from the printer to release the bottom supports.

W A R N I N G ! Since the handle is part of the right side cover, the retaining screw must be fully tightened or printer damage or personal injury may result.

6-4 Removal and Replacement