Removing the Paper Roller

Figure A-13 Solenoid Arm

1 Remove the (1) screw below the Switchback Solenoid Arm on the gear side as shown in Figure A-13, callout 1.

2 Remove the sensor, squeezing the tabs on the underside of the sensor (see Figure A-13, callout 2).

(continued on next page)

Duplexer A -17

Page 373
Image 373
HP 5n C3952A, C2021A, 5 C3916A, 5m C3917A, 4 plus C2037A, 4 C2001A manual Removing the Paper Roller, Figure A-13 Solenoid Arm