Gear Assembly Removal

1 Remove the Top Cover, the Right Side Cover, the Fuser Assembly, and the Formatter Assembly.

2 Remove the Main Motor Assembly (see Figure 6-30).

3 Remove the (2) screws that hold the Gear Assembly (see Figure 6-31 callout 1).

4 Slide the Gear Assembly from the rear of the printer.

N o t e

Before tightening down the mounting screws, be

 

sure the shoulder around the upper left mounting

 

screw hole on the gear assembly protrudes

 

through the frame.

 

 

 

 

Figure 1-31 Gear Assembly Screws (Located behind Main Motor)

6-38 Removal and Replacement