HP C2021A manual LaserJet 4 Plus and 5 Formatter PCA, Interface Connector Support Screws LaserJet

LaserJet 4 Plus and 5 Formatter PCA

1 Remove any MIO or SIMM modules from the Formatter Assembly.

2 Remove the MIO Connector Support Bracket (see Figure 6-25a, callout 2).

3 Remove the (4) I/O screws (see Figure 6-26 callout 1).

4 Remove the (2) Formatter PCA mounting screws (see Figure 6-26 callout 2).

Figure 1-26	Interface Connector Support Screws (LaserJet 4
	Plus and 5)
	When replacing the Formatter Assembly be sure
N o t e
	to re-install all SIMM modules and MIO cards.
	Be sure to reset the page count and the Cold
	Reset paper size after replacing the Formatter.

6-32 Removal and Replacement