HP 4 plus C2037A Removing the Holding Tray Paper Sensor, Figure A-22 Holding Tray Paper Sensor

Removing the Holding Tray Paper Sensor

Figure A-22 Holding Tray Paper Sensor

1 Release the output holding tray.

2 Remove the (2) screws from the stepper motor mount and remove mount. (This provides access to the paper sensor latches.)

3 Squeeze the (2) latch points of the paper sensor to release (see Figure A-22).

4 Disconnect the connector and remove the paper sensor.

A -26 Duplexer