HP 4 plus C2037A, C2021A, 5n C3952A, 5 C3916A, 5m C3917A, 4 C2001A manual Situation Solution

Situation	Solution
The printer prints only part of a	The connection has been broken
page or document.	during transmission. If you move
	the portable device during
	transmission, the connection can
	be broken. IrDA-compliant
	devices are designed to recover
	from temporary connection
	interruptions. Re-establish the
	connection (depending on the
	device you are using, you can
	have anywhere from 3 to 20
	seconds to re-establish the
	connection)
The print job has been properly	If the connection is broken
sent to the printer, but the printer	before the entire print job has
will not print.	been transmitted to the printer
	(printing has not yet started), the
	printer may not print any of the
	job. If the Data light is on, press
	the Job Cancel button to clear
	the printer’s memory. Then,
	position the device within the
	range of operation, and print the
	job again.
The IR status light turns off	The connection may have been
during transmission.	broken If the Data light is on,
	press the Job Canel button to
	clear the printer’s memory.
	Then, position the device within
	the range of operation, and print
	the job again.

B-42 LaserJet 5/5M/5N Printer