Required Tools

Table 6-1

Required Tools

 

 

QTY

TOOL

1#2 Magnetized Phillips Screwdriver (6-inch shaft)

1Small Needle Nose Pliers

1Small Flat-head Screwdriver (6-inch shaft)

15mm Nut driver

Hardware Review

All screws used in the printer are Phillips head, which require a Phillips screwdriver. Figure 6-1 shows the difference between a Phillips and a Pozidriv screwdriver. Note that the Phillips tip has more beveled surfaces.

C a u t i o n

Use of a Pozidriv screwdriver will damage the

 

screw heads. Use Phillips only.

PhillipsPosidriv

Figure 6-1 Comparing Phillips and Pozidrive Screws

6-2 Removal and Replacement